All specifications listed are subject to change without notice.
Where specifications are critical to your application, please consult RBI.
Huskie Hydraulic Hammer Specifications
Remarks:
The hammer is to be used within the specified oil pressure, oil flow and gas pressure parameters.
The carrier hydraulic system relief pressure is to be set at 600 to 800 psi above the hammer “Operating Pressure.”
Hydraulic pressure is to be measured at the hose end of the carrier (output or pressure hose) when disconnected from the hammer.
Huskie Hydraulic Hammer Performance
* Not an appropriate application The data presented here is given as reference only for general production characteristics. Job and carrier conditions, operator experience and material strength may affect actual hammer output.